.. _getting_started_qs8m:

QS8M
====

First Steps
-----------

.. admonition:: Unpack, connect, power up and boot
   :class: tip

   .. admonition:: Select the baseboard
      :class: note

      .. toctree::
         :maxdepth: 1

         ../qsbase2/quickstart-qsbase2
         ../qsbase4/quickstart-qsbase4

Install Quick Guide
-------------------

.. admonition:: How to flash a system image to the module
   :class: tip
   
   Refer to :ref:`uuu` for details

   .. admonition:: 1. Get a system image
      :class: note

      Download and unpack `qs8m-mq00-debian-bookworm <https://www.karo-electronics.com/fileadmin/download/debian_images/qs8m-mq00-debian-bookworm.zip>`_ 
      or `qs8m-nd00-debian-bookworm <https://www.karo-electronics.com/fileadmin/download/debian_images/qs8m-nd00-debian-bookworm.zip>`_ as an example

   .. admonition:: 2. Start fastboot
      :class: note

      (Re-)boot the board and **"Hit any key to stop autoboot"** to get to the U-Boot command line interface
      
      .. prompt::
         :prompts: U-BOOT>
         :substitutions:

         fastboot usb 0

   .. admonition:: 3. Flash it!
      :class: note

      Change to the unpacked image directory and run uuu

      .. prompt::
         :prompts: $
         :substitutions:

         sudo ./uuu -v (Linux)   uuu.exe -v (Windows)

Yocto Quick Guide 
-----------------

.. admonition:: Build and flash Yocto images in 10 minutes
   :class: tip

   .. admonition:: Select the QS8M version
      :class: note
 
      .. toctree::
         :maxdepth: 1

         ../quickguides/qs8m-mq00
         ../quickguides/qs8m-nd00