.. _getting_started_qs93:

.. |module| replace:: QS93
.. |baseboard| replace:: qsbase93
.. |IMX| replace:: imx93

QS93
====

Here you will find step by step instructions on how to use, install, build with Yocto and set up a display.

First Steps
-----------

.. admonition:: Unpack, connect, power up and boot
   :class: tip

   .. toctree::
      :maxdepth: 1

      ../qsbase93/quickstart-qsbase93

Install Quick Guide
-------------------

.. admonition:: How to flash a system image to the module
   :class: hint
   
   More details: :ref:`uuu`

   .. admonition:: 1. Get a system image
      :class: note

      Download and unpack `qs93-5210-debian-bookworm <https://www.karo-electronics.com/fileadmin/download/debian_images/qs93-5210-debian-bookworm.zip>`_ as an example

   .. admonition:: 2. Start fastboot
      :class: note

      (Re-)boot the board and **"Hit any key to stop autoboot"** to get to the U-Boot command line interface
      
      .. prompt::
         :prompts: U-BOOT>
         :substitutions:

         fastboot usb 0

   .. admonition:: 3. Flash it!
      :class: note

      Change to the unpacked image directory and run uuu

      .. prompt::
         :prompts: $
         :substitutions:

         sudo ./uuu -v (Linux)   uuu.exe -v (Windows)

Yocto Quick Guide 
-----------------

.. admonition:: Build and flash Yocto images in 10 minutes
   :class: tip

   .. toctree::
      :maxdepth: 1

      ../quickguides/qs93-5210

.. include:: ../enable_display.inc
   
.. include:: ../custom_panel.inc