.. _tx8-bsp-m4: NXP Coprocessor Development --------------------------- NXP i.MX8 and i.MX9 application processors provide a highly efficient low-power Cortex-M core next to the Cortex-A cores. This general purpose core for low-power processing may increase the battery lifetime, which is an important benefit for many mobile embedded devices. .. list-table:: :header-rows: 1 :widths: 30 25 45 * - SoC - Coprocessor - Module series * - i.MX 8M Mini / Nano - Cortex-M4 - QS8M, QSXM, TX8M * - i.MX 8M Plus - Cortex-M7 - QSXP, TX8P * - i.MX 93 - Cortex-M33 - QS93, TX93 NXP provides the MCUXpresso SDK to develop on the Arm Cortex-M side. The MCUXpresso SDK brings open source drivers, middleware, reference example applications and documentation to speed up your software development. The flow is the same on all SoCs — only the memory addresses differ (tables in the guides below): #. set up the host toolchain and the MCUXpresso SDK (:doc:`setup`) #. enable the ``copro`` distro feature and the ``karo-copro`` devicetree overlay in the BSP (:doc:`setup`) #. build a firmware example with the SDK and boot it on the coprocessor (:doc:`hello-world`, :doc:`multicore`) .. rubric:: Contents .. list-table:: :header-rows: 1 :widths: 30 70 * - Topic - Contents * - :doc:`setup` - Host setup: MCUXpresso SDK, GNU toolchain, CMake; BSP setup: ``copro`` distro feature and ``karo-copro`` overlay * - :doc:`hello-world` - Build a hello-world firmware and start it on the Cortex-M via U-Boot ``bootaux`` (per-SoC TCM addresses) * - :doc:`multicore` - RPMsg-Lite multicore demo: Linux <-> Cortex-M communication via ``/dev/ttyRPMSG30``; boot from TCM/DRAM or via remoteproc sysfs .. toctree:: :maxdepth: 1 :hidden: setup hello-world multicore