• Getting started
    • QSXP on QSBASE3
      • Unboxing
      • Wiring
      • Booting
      • Next Step Usage
      • Next Step Software
      • Next Step Hardware
    • QSXM on QSBASE3
      • Unboxing
      • Wiring
      • Booting
      • Next Step Usage
      • Next Step Software
      • Next Step Hardware
    • QS8M on QSBASE2
      • Unboxing
      • Wiring
      • Booting, First steps
      • TTL to USB Terminal Connection
      • Next Steps
        • Re-installing the OS
        • Customizing the OS
      • Display support
        • Raspberry Pi Touch Display
    • QSMP on QSBASE2
      • Unboxing
      • Wiring
      • Booting, First steps
      • TTL to USB Terminal Connection
      • Next Steps
        • Re-installing the OS
        • Customizing the OS
      • Display support
        • Raspberry Pi Touch Display
    • QSMP on QSBASE1
      • Unboxing
      • Wiring
      • Booting, First steps
      • TTL to USB Terminal Connection
      • Next Steps
        • Re-installing the OS
        • Customizing the OS
      • Display support
    • TX8M StarterKit
      • Unboxing
      • Assembling and connecting
      • Booting, First steps
        • TX8M-ND00
        • TX8M-1610
        • TX8M-1620
      • Terminal Connection
      • Play a video (TX8M-1610)
      • (Re)Installing the OS
        • TX8M-ND00
        • TX8M-1610
        • TX8M-ND00
      • Customizing the OS
      • CAN Support
    • TXMP on Mainboard 7
      • Detailed Documentation
      • Booting, First steps
      • Next Steps
        • Re-installing the OS
        • Customizing the OS
      • Display support
    • TX6 or TXUL on Mainboard 7
      • Detailed Documentation
      • Booting, First steps
      • Next Steps
        • Re-installing the OS
        • Customizing the OS
      • Display support
    • TX6UL Evaluation Kit
      • Overview
      • Features
      • Silicon Labs WF111 Wi-Fi Module
      • Project QuickStart Kit Option
      • Software Installation
        • MFG-Tool
      • Connector Pinouts
      • Wifi Setup
    • STM32CubeProgrammer
      • Installing STM32CubeProgrammer
      • USB serial link
      • Flash the eMMC
      • U-Boot Environment
    • MFG-Tool
      • MFG-Tool Setup
        • Overview
        • Unpack MfgTool.zip
        • 1. Execute MfgToolSetup.bat
        • 2. Enter p/n
        • 2.1. Installation type
        • 3. Choosing Cutsom Files
        • 4. MfgTool2 is Started
      • Adding Custom Files
        • Environment settings
        • Change mtdparts - NAND partition layout
    • UUU - Universal Update Utility
      • Getting uuu
      • Usage
      • Running uuu
      • UUU with Custom Files
        • Creating Filesystems
        • Script Examples
  • Hardware Documentation
    • QS-GUIDE
      • Concept
      • Unique Features
        • EMC Quality by Design
        • Advanced Soldering
        • Standard Pinout
      • Layout Guidelines
        • Land pattern
        • Solder Mask
        • GND Vias
      • Soldering Recommendations
        • Recommended stencil design
      • Thermal Considerations
      • Packaging
      • QS Standard Pinout
        • Power Supply, Reset and Boot mode
          • Power Supply
          • QS Operating conditions
          • QSX Operating conditions
          • NRST_PWREN - Reset and Peripheral Power Enable
            • QSMP
            • QS8M
            • QSX
          • BOOTMODE
        • USB
          • VBUS
          • Wiring example
          • USB3 Super Speed
        • SD Interface
          • Signals
          • SD-Card example diagram
        • Ethernet
          • Wiring example
        • CAN
        • I2C
        • SPI
        • UART
        • Display
          • Backlight and Display Control
          • 18-bit RGB Display Interface
          • MIPI DSI Display
        • Camera
        • PCIe
      • Disclaimer
      • Intended Audience
      • Acronyms and Abbreviations
    • TX-GUIDE
      • 1. Concept
        • 1.1. Disclaimer
        • 1.2. Intended Audience
        • 1.3. Copyright Notice
        • 1.4. Acronyms and Abbreviations
      • 2. Feature Overview
      • 3. Connector Pin Assignments and Signal Descriptions
        • 3.1. Power Supply
        • 3.2. Reset & Bootmode
        • 3.3. RTC & Power-Button
        • 3.4. Ethernet Signals
          • 3.4.1. Ethernet Physical Layer Layout Guidelines
          • 3.4.2. Power and Ground Planes
          • 3.4.3. 4 Layer Stackup
          • 3.4.4. 2 Layer Stackup
          • 3.4.5. Component Placement
          • 3.4.6. Design Techniques for EMI Suppression
          • 3.4.7. Controlled Impedance for Differential Signals
          • 3.4.8. Magnetics Module
        • 3.5. USB
          • 3.5.1. USB Physical Layer Layout Guidelines
          • 3.5.2. Controlled Impedance for USB Traces
          • 3.5.3. Isolation of DP/DM Traces
          • 3.5.4. Isolated shielding on the USB connector
          • 3.5.5. USB recommendations
        • 3.6. I2C
          • 3.6.1. Example I2C Voltage Level Translator (TX27 and TX51 only)
          • 3.6.2. I2C recommendations
        • 3.7. PWM / 1-WIRE
        • 3.8. CSPI - Configurable Serial Peripheral Interface
        • 3.9. SDIO Interfaces
          • 3.9.1. SD-Card example diagram using level shifters
          • 3.9.2. SD-Card example diagram only for 3.3V modules
        • 3.10. UARTs
          • 3.10.1. UART Example diagram
        • 3.11. Keypad Interface
        • 3.12. Digital Audio Ports
        • 3.13. CMOS Sensor Interface
        • 3.14. Extended and 2nd CMOS Sensor Interface (TX51, TX53 and TX6 only)
        • 3.15. LCD Interface
        • 3.16. LVDS option (TX53, TX6, TX8X only)
          • 3.16.1. LVDS pin mapping
          • 3.16.2. LVDS recommendations
          • 3.16.3. USB3 pin mapping (TX8X only)
          • 3.16.4. SATA pin mapping (TX53, TX6Q, TX6QP only)
          • 3.16.5. SATA recommendations
        • 3.17. CAN Interface
        • 3.18. 2nd Ethernet RMII (TX28 only)
        • 3.19. TV out (TX51, TX53 only)
          • 3.19.1. TV Encoder Recommendations
        • 3.20. PCI express (TX6, TX8M, TX8X only)
          • 3.20.1. PCI Express interface recommendations
            • 3.20.1.1. PCI Express general routing guidelines
            • 3.20.1.2. PCI Express coupling lane
          • 3.20.2. PCIe recommendations
        • 3.21. GPIO and module specific signals
      • 4. Optional Debugging Connector
        • 4.1. Debug Connector Signal Assignment
        • 4.2. Debug connector location
      • 5. Mechanical
        • 5.1. TX module outline
        • 5.2. SO-DIMM connector
        • 5.3. DIMM Connector PCB Layout example
        • 5.4. TX Fastener Kit
        • 5.5. TX Heatsink Kit (17 K/W)
          • 5.5.1. Standard extruded heatsink – SK 473 – length 68mm
          • 5.5.2. Heat conductive gel foil – GEL 10
        • 5.6. TX Heatsink Kit (7 K/W)
          • 5.6.1. Standard extruded heatsink – SK 560 – length 68mm
          • 5.6.2. Heat conductive gel foil – GEL 27 S 25
    • Pinouts
      • QSBASE1
        • X1 LCD
        • X10 DEBUG UART
        • JTAG Header
        • Test Pad Numbering
      • QSBASE2
        • Test Pad Numbering
        • X7 DEBUG UART
        • X8 EXPANSION CONNECTOR
      • QSBASE3
        • X2 BOOTMODE
        • X3 DEBUG UART
        • X9 EXPANSION CONNECTOR
        • X6 MIPI DSI
        • X102 1st MIPI CSI
        • X103 2nd MIPI CSI
        • X101 M.2
      • TX-MIPI-LVDS Mainboard
        • X3 Header (Debug connector)
        • X4 Header
        • X9 Header
        • X10 Header
        • X11 Header
        • X14 Header (MIPI-CSI connector)
      • TX Mainboard 7
      • TX6UL Evaluation Kit
        • ST103 UART5 / CAN0
        • ST102 UART6 / CAN1
        • ST101 UART2 / UART3
        • ST100 UART1
        • ST104 MISC
        • ST105 LCD
  • Software Documentation
    • QSXP | QSXM | QS8M | TX8M
      • NXP Zeus BSP
        • NXP Documentation
        • General
          • CPU Temperature
        • karo-image-weston
          • Test the GPU
          • Play a Video
      • WiFi/BT Guide
        • WiFi DTB
        • Connecting WiFi
        • Set Up Bluetooth
      • Camera Guide
        • Camera Enablement
        • Camera DTB
        • Stream Camera
    • QSMP | TXMP
      • Zeus BSP
        • General
          • Sleep Mode
        • karo-image-weston
          • Test the GPU
          • Play a Video
      • Cortex®-M4 development
        • Coprocessor Firmware Development
        • Coprocessor Management Overview
        • How to boot the Cortex® Coprocessor
        • How to configure system resources
        • Resource manager for coprocessing
        • Kernel Configurations needed
        • Device Tree Modifications needed
        • How to Control the Coprocessor from Linux
        • How to start the Coprocessor from the bootloader
    • TX6 | TXUL
      • Zeus BSP
        • General
          • CPU Temperature
        • karo-image-weston
          • Test the GPU
          • Play a Video
    • QT5 Cross Compilation
      • Toolchain with QT Creator
        • Requirements
        • Building SDK
        • Installing SDK
        • Installing QT Creator
        • Setup QT Creator
          • SDK
          • Device
        • Hello World
  • Debian Guide
    • TX8 Debian Guide
      • Using Flashimage
      • Manual installation
        • Debian Net-Installer
          • Before you start
          • Getting uuu
          • Flash U-Boot
          • Running Debian Net-Installer
            • Ramdisk, kernel, devicetree
            • Preparing your device
            • Configuring U-Boot
            • Booting the Installer
          • Booting your Installation
            • Kernel and devicetree into eMMC
          • Installing Desktop
        • Manual Desktop installation
          • On-screen keyboard
        • Time
    • TX6 Debian Guide
      • MFG-Tool DEBIAN-STRETCH
        • Environment
        • DTB
        • Kernel and kernel modules
        • Rootfs
      • MfgTool DEBIAN-NETINSTALLER
        • Environment
        • DTB
        • Kernel and kernel modules
        • Initrd RAM disk
      • Debian Netinstaller on TX6
        • 1. Select language and location
        • 2. Configure the network
        • 3. Choose a mirror and download installer components
        • 4. Set up users and passwords
        • 5. Ignore partitioning warnings
        • 6. Partitioning
        • 7. Popularity-contest
        • 8. Software selection
        • 9. Ignore Grub warning
        • 10. Continue without bootloader
      • Install Desktop Environment
  • Yocto Guide
    • Mainline Yocto Zeus Guide
      • BSP Setup
        • References
        • Requirements
        • Host Packages
        • Setting up Git
        • Setting up the Repo Utility
        • BSP Checkout
        • Updating Sources
        • Building Images
          • Building TX6/TXUL Series
            • Building the Image
              • Getting the SDK
            • Image Deployment
          • Building QSMP/TXMP Series
            • Building the Image
              • Getting the SDK
            • Image Deployment
      • Introduction to sstate cache
        • sstate cache background
        • sstate cache server
        • Verify the sstate is working
      • Customizing the BSP
        • Kernel & Devicetree
          • Entering Devshell
          • Menuconfig
          • Building Kernel
          • Devicetree
    • NXP Yocto Zeus Guide
      • BSP Setup
        • References
        • Requirements
        • Host Packages
        • Setting up Git
        • Setting up the Repo Utility
        • BSP Checkout
        • Updating Sources
        • Building Images
          • Bitbake Setup
          • local.conf
            • WiFi/Bluetooth
            • Raspi Camera
          • Starting Build
          • Getting the SDK
          • Image Deployment
      • Enable sstate cache
        • sstate cache background
        • sstate cache server
        • Verify the sstate is working
      • Basler Camera
        • Build Directory
        • Basler Layers
        • Patching Basler Layers
        • Building Image
        • Usage
      • Chromium on TX8M/QS8M
        • Running Chromium
      • NXP Documentation
    • Legacy Yocto
      • Yocto Thud Guide
        • Setup
          • References
          • Requirements
          • Host Packages
          • Setting up Git
          • Setting up the Repo Utility
          • BSP Checkout
          • Build Configuration
          • U-Boot Version
          • ARM® Trusted Firmware
        • Building an Image
        • Image Deployment
        • Enable sstate Cache
      • NXP Yocto Sumo Guide
        • Setup
          • References
          • Requirements
          • Host Packages
          • Setting up Git
          • Setting up the Repo Utility
          • BSP Checkout
          • Building Images
            • Building TX8M/QS8M Series
              • U-Boot Version
              • Building The Image
              • Restarting a build environment
              • Image Deployment
            • Building TX6/TXUL Series
              • U-Boot Hint
              • Building the image
              • Restarting a build environment
              • Image Deployment
        • Enable sstate cache
          • sstate cache background
          • sstate cache server
          • Verify the sstate is working
        • Chromium on TX8M
          • Running Chromium
          • Autostarting Chromium
            • Entropy problem
            • Creating Service
      • Yocto Rocko Guide
        • 1. Setup
          • 1.1. References
          • 1.2. Requirements
          • 1.3. Host packages
          • 1.4. Upgrade git version
          • 1.5. Setting up git
          • 1.6. Setting up the repo utility
          • 1.7. Yocto Project Setup
          • 1.8. Choosing a machine
          • 1.9. Set up the environment
          • 1.10. U-Boot
          • 1.11. Choosing an image target
          • 1.12. Additional packages
          • 1.13. Building an image target
          • 1.14. Image Deployment
        • 2. Enable sstate cache
          • 2.1. sstate cache background
          • 2.2. sstate cache server
        • 3. Verify the sstate is working
        • 4. Linux Kernel Version
        • 5. Adding Layers to Yocto
    • If you’re new to Yocto
  • Knowledge Base
    • How-To’s
      • Enabling USB-Bootmode
        • QS(X) Modules
        • TX Modules
        • Physical Pins
          • QSBASE1
          • QSBASE2
          • QSBASE3
          • TX-(MIPI)-LVDS Mainboard
          • TX Mainboard 7
          • TXUL EvalKit
      • TTL Converter Terminal Connection
        • Wiring
        • Accessing
          • Linux
          • Windows
      • Running UUU on Windows 7
        • Installing winusb file
        • Using Zadig to make UTP work
      • Linux WiFi Setup
        • 1. Device Name
        • 2. Bring up the Device
        • 3. Scan WiFi
        • 4. Connect
        • 5. Optain IP
        • 6. Test Connection
      • Converting ramdisk .img file for u-boot
    • Common Support Help
      • Python v3.6+ on Debian 9
        • Update the system
        • Installing Python 3.6.x from source
        • Set the system to default to Python 3.6
    • Troubleshooting
      • UUU USB Failures
        • UUU exits without displaying anything
        • Wait for Known USB Device Appear
        • TX8M-ND00 LIBUSB-HID-ERROR
    • Known Issues
      • Linux Issues
        • Compile errors with modern Kernel on Host
          • Problem:
          • Cause:
          • Workaround:
          • Procedure:
      • U-Boot Issues
        • Loading kernel is very slow
          • Problem:
          • Cause:
          • Workaround:
          • Procedure:
    • General Information
      • Yocto Sources Handling
        • Preamble
        • Sources in Yocto
  • Frequently Asked Questions
    • General Questions
      • Connecting TTL Terminal
      • Enabling Bootmode
      • UUU on Windows 7
    • Troubleshooting
      • UUU USB Failures
      • Compile Errors on Modern Kernel
      • Requested init /linuxrc failed
  • Changelog
 
Ka-Ro electronics GmbH
  • Docs »
  • Debian Guide »
  • TX8 Debian Guide
  • View page source
Next Previous

TX8 Debian Guide¶

Using Flashimage¶

Debian images for TX8M can be found in our Download Area. How to flash them to your board see UUU - Universal Update Utility.

Manual installation¶

  • Debian Net-Installer
    • Before you start
    • Getting uuu
    • Flash U-Boot
    • Running Debian Net-Installer
    • Booting your Installation
    • Installing Desktop
  • Manual Desktop installation
    • On-screen keyboard
  • Time
Next Previous

View page source

© Copyright 2019-2020, Ka-Ro electronics GmbH

Support requests to support@karo-electronics.com

Go to documentation root

www.karo-electronics.com

Imprint