TXMP on Mainboard 7¶
This guide will help new users to quickly use our TXMP Linux Development Kit.
Detailed information about the TXMP module itself are available on our website.
Booting, First steps¶
After connecting the 5V DC power your board will boot. Notice the linux heartbeat shown by the LED.
Your module is pre-programmed with a headless systemd-based Linux. To get terminal access connect the RS232 cable.
Re-installing the OS¶
The pre-compiled Image files to flash the TXMP are located in our Download Area. They contain the images you need to flash your module.
Download the Images and proceed with the STM32CubeProgrammer.
The TXMP attached to Mainboard 7 supports parallel displays.
The GLYN TFT Family Concept ist fully supported by our TXMP on Mainboard 7.