Quickstart Guide

../../../_images/qsmp-qsbase1.png

This guide will help new users to quickly setup our QSBASE1 Linux Development Kit.

Detailed information about the QS solder-in module itself is available on our website.

Unboxing

When opening the package of the Development Kit you should find the following components inside:

  1. The evaluation board “QSBASE1”.

  1. An USB cable which is used for power-connection and flashing.

  2. A TTL to USB Serial Converter cable.

  1. Our catalog.
../../../_images/Verpack3.JPG
../../../_images/Verpack2.JPG
../../../_images/Verpack1.JPG

Wiring

Connect the QSBASE1 board as shown in the image below.

  1. Connect the USB to the board. The other side is also connected with your host computer.

  1. Verify the Bootmode-jumper is not in Download-Mode. You can also remove it. For help see Enabling USB-Bootmode.

  1. Connect the TTL to USB Serial Converter cable to the DEBUG UART port on the board, notice the black wire on Pin 1. The other side is connected to your computer.
../../../_images/qsbase1-usb-wiring.png
../../../_images/qsbase1-bootmode.png
../../../_images/qsbase1-debug-wiring.png

Booting

After connecting the micro USB your board will boot.

Your module is pre-programmed with our karo-image-minimal headless Linux.

Next Steps Usage

Topic

Description

Re-installing the OS

  • The pre-compiled image files to flash the QSBASE4 Development Kit are located in our Download Area.

  • They contain different environments, e.g. a minimal and a desktop environment.

  • Download the images and proceed with the UUU - Universal Update Utility.

Display support

Your QSBASE1 Development Kit also support parallel displays.

Tip

The GLYN TFT Family Concept ist fully supported by QSBASE1 Development Kit. https://www.glyn.com/Products/Displays/TFT-Family-Concept

Next Steps Software

Topic

Description

Linux Guide

Go to: Software Documentation

WiFi Guide

To enable WiFi support.

Go to: Software Documentation -> WiFi/BT Guide

Camera Guide

To enable camera support.

Go to: Software Documentation -> Camera Guide

Google Coral Edge TPU

How to use Google Coral PCIe ML accelerator.

Go to: Software Documentation -> Coral Edge TPU

Machine Learning

Using NPU and starting ML Demos.

Go to: Software Documentation -> Machine Learning Guide

QT5 Development

Develop a QT5 app for your customers.

Go to: Software Documentation -> QT Guide

Electron Development

Develop an Electron app for your customers.

Go to: Software Documentation -> Electron Guide

Customizing the BSP

If you want to use our Yocto Layer, or want to create your own customized Linux distribution, have a look at our Yocto Guide.

Go to: Yocto Guide

Next Steps Hardware

Topic

Description

QSBASE4 Pinouts

Connector pinouts can be found in the Hardware Documentation.

Go to: Hardware Documentation -> Pinouts -> Pinout

QS Developers Guide

QS-Standard pinout, description and layout guidelines.

Go to: Hardware Documentation -> QS-GUIDE