Streaming on NXP i.MX modules

Streaming and capturing video from a camera on i.MX8/9 based modules (QS8M, QSXM, QSXP, QS93) with a weston desktop image. See Camera Guide for enablement.

Raspberry Pi Camera (IMX219) on i.MX8M Mini/Nano (qs8m, qsxm)

Start the camera stream from the serial terminal:

gst-launch-1.0 -v v4l2src ! \
"video/x-bayer,format=rggb,width=640,height=480,framerate=30/1" ! \
bayer2rgb ! videoconvert ! autovideosink sync=false

Capture a single .jpg frame from the camera stream:

gst-launch-1.0 -v v4l2src num-buffers=1 ! \
"video/x-bayer,format=rggb,width=640,height=480,framerate=30/1" ! \
bayer2rgb ! videoconvert ! jpegenc ! filesink location=test-cap.jpg

Raspberry Pi Camera (IMX219) on i.MX8M Plus (qsxp-ml81)

Start the imx8-isp in the background:

/opt/imx8-isp/bin/start_isp.sh &

Then start the camera stream:

gst-launch-1.0 v4l2src device=/dev/video2 ! waylandsink

Basler cameras (qsxm-mm60, qsxp-ml81 on QSBASE3)

Start the pylon viewer from the serial terminal:

export DISPLAY=:0; pylon

Enable the camera and click on the camera icon to stream a live video.

Live-stream the camera with gstreamer:

gst-launch-1.0 -v v4l2src device=/dev/video2 ! waylandsink

You can also record the camera stream using the VPU:

gst-launch-1.0 v4l2src device=/dev/video2 ! \
"video/x-raw, format=NV12, width=1920, height=1080, framerate=30/1" ! \
vpuenc_h264 ! mpegtsmux name=mux ! filesink location=test_1080.ts