Changelog

• Changed formatting of some headings by Uwe Steinkohl at 2024-11-28 16:31:39

• added chapter to use LVGL lib by Uwe Steinkohl at 2024-11-28 14:48:23

• Added ACCEPT_EULA to getting started for stm modules by Marcel Mertens at 2024-09-17 12:32:03

• TXMP2 added by MV-1 at 2024-09-13 13:39:43

• Update mb7-hw-doc.pdf by MV-1 at 2024-09-04 10:35:26

• added some corrections for imx8m plus CA7 support by Uwe Steinkohl at 2024-08-02 13:33:10

• added CM33 support for TX93/QS93 products by Uwe Steinkohl at 2024-07-31 09:55:38

• Added rauc to latest topics by Marcel Mertens at 2024-07-05 12:02:13

• Changed Release tag in mainline documentation by Marcel Mertens at 2024-07-05 11:58:53

• RAUC support documentation by Marcel Mertens at 2024-07-05 11:36:50

• Fixed wrong x6 pinout for qsbase93 by marcel at 2024-06-20 12:40:39

• Added display setting discription for STM modules (videomode) by marcel at 2024-06-18 13:09:37

• fixed warning “Title underline too short.” by marcel at 2024-06-11 10:32:22

• Update POW.rst by MV-1 at 2024-06-11 09:58:10

  QSGUIDE reference to "Enabling USB-Bootmode" instead of boot mode polarity table,
  

• Described USB connector functions for QSBASE93 by marcel at 2024-06-11 07:05:37

• make *latest* BSP branch configurable by Lothar Waßmann at 2024-06-05 10:48:35

• improve description of custom layer handling and add KARO_BASEBOARD doc by Lothar Waßmann at 2024-06-05 10:19:22

• fix name of U-Boot env files by Lothar Waßmann at 2024-06-05 10:17:23

• yocto-guide: cleanup by Lothar Waßmann at 2024-06-05 10:16:36

• BuildTX6.rst: change karo-nxp-release.sh to setup-environment by Lothar Waßmann at 2024-06-05 10:12:39

• use list-table by Lothar Waßmann at 2024-06-05 10:11:57

• fix missing newlines at eof by Lothar Waßmann at 2024-06-05 10:06:15

• i.MX 93 A0 moved to legacy Yocto by MV-1 at 2024-05-16 09:26:56

• Reference to IPC/JEDEC J-STD-020 added to soldering ecommendations by MV-1 at 2024-05-16 09:00:37

• Added docu for PAN9028 wifi/bluetooth combo module by marcel at 2024-04-22 09:15:44

• Fixed some bugs in documentation, e.g. pictures on wrong places by marcel at 2024-04-22 09:13:20

• QSMP-1351 Debian added by MV-1 at 2024-03-22 16:31:20

• Getting started updated by MV-1 at 2024-03-22 13:54:58

• Fast Flashing STM32MP1 Boards updated by MV-1 at 2024-03-22 13:53:49

• Custom panel section added to QS93 getting started by MV-1 at 2024-03-21 14:56:20

• Update gh-pages-creation.yml by Oliver Wendt at 2024-03-20 12:57:04

  Revert
  

• Update gh-pages-creation.yml by Oliver Wendt at 2024-03-20 09:42:18

  Changed the PAT_TOKEN variable to a new token PAT_TOKEN_2
  

• QSMP Debian added by MV-1 at 2024-03-19 08:43:11

• Mainline Yocto Getting Guides updated by MV-1 at 2024-03-14 11:06:37

• ARM64 Debian Guide removed by MV-1 at 2024-03-14 09:10:10

• WSL Connect USB devices updated by MV-1 at 2024-03-14 08:30:28

• QS93 getting started - enable display added by MV-1 at 2024-03-13 15:09:31

• new NXP BSP mickledore KARO-2024-03-12 release by Markus Bauer at 2024-03-13 11:15:26

• Pictures of QSBASE93 wiring updated by MV-1 at 2024-03-13 11:31:45

• Pictures of QSBASE1 wiring updated by MV-1 at 2024-03-13 08:35:38

• new mainline BSP mickledore KARO-2024-03-12 release by Markus Bauer at 2024-03-13 07:22:48

• Update qs-back2.png by MV-1 at 2024-02-29 16:44:29

• Added :orphan: to several files to avoid warnings during build by MV-1 at 2024-02-26 16:04:05

• linux-wifi: make the rootfs ‘writeable’… by Lothar Waßmann at 2024-02-26 05:36:11

• Getting Started revised by MV-1 at 2024-02-22 14:19:25

• More Debian images by MV-1 at 2024-02-16 12:34:09

• WiFi add-on PAN9028 direct use on QSBASE1 added by MV-1 at 2024-02-05 14:59:21

• TX Heatsink Kit (7 K/W) by MV-1 at 2024-02-05 11:20:16

• Electron some remarks added by MV-1 at 2024-01-30 09:53:23

• Electron Debian Setup X & Weston by MV-1 at 2024-01-26 11:36:53

• Renesas RZ/G2L Debian images by MV-1 at 2024-01-25 14:00:01

• Electron Debian Setup by MV-1 at 2024-01-24 12:42:53

• TX93 overlays removed wrong reference to TX-MIPI-LVDS by MV-1 at 2024-01-22 10:28:16

• More Debian images by MV-1 at 2024-01-22 10:17:45

• More Debian 12 Images by MV-1 at 2024-01-19 15:07:58

• TX93 Debian Bookworm images by MV-1 at 2024-01-17 15:34:33

• Debian Bookworm Netinstaller Guide by MV-1 at 2024-01-15 12:27:58

• Kernel version added to Debian image links by MV-1 at 2024-01-11 12:26:53

• Public Debian 11 image links by MV-1 at 2024-01-11 11:06:10

• WSL as NFS Server by MV-1 at 2024-01-11 10:25:43

• copyright 2024 by Markus Bauer at 2024-01-02 08:06:18

• Getting Started - Quick Guides completed by MV-1 at 2023-12-08 10:05:58

• faq: otg_mode: add description for deactivating USBOTG port by Lothar Waßmann at 2023-12-06 05:57:30

• python-is-python3 and export PATH added to Quick Guides by MV-1 at 2023-12-05 16:13:54

• Quick Guides added to Getting Started by MV-1 at 2023-12-05 15:08:54

• Build labels and reference to wsl added to yocto-guide by MV-1 at 2023-12-05 14:49:28

• Moved enable sstate foodnote mark out of the header by MV-1 at 2023-12-05 14:36:16

• mainline/customizing: fix reference to meta-karo by Lothar Waßmann at 2023-11-29 11:42:17

• TX Mainboard 7 Getting Started revised by MV-1 at 2023-11-27 14:21:02

• Yocto Guide update by MV-1 at 2023-11-27 09:44:56

• Yocto Guide Mickledore added to overview by MV-1 at 2023-11-24 14:27:07

• nxp-bsp mickledore docs update by Markus Bauer at 2023-11-23 11:06:17

• external links are now opened in a new tab by default by Markus Bauer at 2023-11-14 11:47:12

• latest nxp-bsp langdale release for i.mx8 and i.mx9 by Markus Bauer at 2023-11-14 11:21:03

• tx-pinout: add TV doc regarding i.mx53 by Markus Bauer at 2023-11-14 11:20:44

• different fixes for labels and consistent naming by Markus Bauer at 2023-11-14 11:20:13

• STM32CubeProgrammer reference to UUU removed, WSL added to UUU note by MV-1 at 2023-11-03 10:01:37

• Reference to Fast Flashing STM32MP1 Boards added to Getting Started by MV-1 at 2023-10-31 12:29:39

• Fast Flashing STM32MP1 Boards by MV-1 at 2023-10-31 11:44:58

• Getting Started TOC fixed by MV-1 at 2023-10-31 10:04:22

• Getting Started - Layout has been changed by MV-1 at 2023-10-31 09:50:21

• TX8M/TX93 on Mainboard 7 added to Getting started by MV-1 at 2023-10-30 12:08:06

• Linux on Windows with WSL added by MV-1 at 2023-10-27 09:11:11

• Fix NXP overlay table by jonas at 2023-10-20 09:27:06

• add qs93 and tx93 to chapter ‘software-documentation/uboot/fdt-overlays’ and improve FDT overlay example by jonas at 2023-10-18 07:33:15

• fix typo ‘QSbase 1’ -> ‘QSBase 1’ by jonas at 2023-10-18 07:23:44

• replace occurences of ‘raspi’ with ‘raspberry’ by jonas at 2023-10-18 07:22:15

• NXP Yocto BSP Guide: move TX8M,TX8P,QS8M,QSXM,QSXP into new table row assigned to release version kirkstone by jonas at 2023-10-11 09:54:11

• NXP Yocto BSP Guide: move TX8M,TX8P,QS8M,QSXM,QSXP into new table row assigned to release version kirkstone by jonas at 2023-10-11 09:41:01

• Merge remote-tracking branch ‘refs/remotes/origin/master’ by jonas at 2023-10-11 08:32:31

• Merge remote-tracking branch ‘origin/master’ by jonas at 2023-10-11 08:13:29

• Merge remote-tracking branch ‘origin/master’ by jonas at 2023-10-11 08:13:29

• move TX8M,TX8P,QS8M,QSXM,QSXP series from langdale to kirkstone latest release versions by jonas at 2023-10-10 12:16:05

• move TX8M,TX8P,QS8M,QSXM,QSXP series from langdale to kirkstone latest release versions by jonas at 2023-10-10 12:16:05

• Revert “change repo init […] -langdale to repo init […] kirkstone as langdale not (yet) available” by jonas at 2023-10-05 12:41:08

  This reverts commit 9c1380f30639e8427154d97d00a407fe753d206e.
  

• Change ‘…disable bootmode…’ to ‘…disable bootmode USB…’ by jonas at 2023-10-05 11:09:26

• Change ‘Enable the bootmode…’ to ‘Enable the USB-bootmode’ by jonas at 2023-10-05 10:59:13

  ls
  

• change repo init […] -langdale to repo init […] kirkstone as langdale not (yet) available by jonas at 2023-10-04 09:55:40

• New NXP langdale BSP for all i.mx8/9 and add more camera support documentation by Markus Bauer at 2023-09-28 14:33:39

• docu clarifications regarding UART/terminal output following connection. by jonas at 2023-09-04 07:51:25

• nxp-bsp: correct latest kirkstone version info by Markus Bauer at 2023-08-25 12:02:14

• gitignore: ignore __pycache__ folders by Markus Bauer at 2023-08-25 11:41:54

• Makefile: enable turbo build ;-) by Markus Bauer at 2023-08-25 11:40:52

• changed image width for now compressed images in all files by Markus Bauer at 2023-08-25 11:40:27

• added config variable exclude_dirs to sphinx extension imgpreproc by jonas at 2023-08-25 11:10:00

• added sphinx plugin for image compression during preprocessing by jonas at 2023-08-25 08:42:26

• changed package name from phyton3-sphinxdoc to phyton3-sphinx by jonas at 2023-08-17 08:10:19

• nxp bsp: add i.mx93 release information by Markus Bauer at 2023-08-14 14:12:23

• compress bigger images by Markus Bauer at 2023-08-11 11:53:16

• i.mx93: add quickstarts; generalize TX quickstart on lvds-mb by Markus Bauer at 2023-08-11 08:23:36

• new mainline bsp version by Markus Bauer at 2023-08-03 14:32:17

• set a fixed page-width for docs by Markus Bauer at 2023-08-03 13:42:57

• add guide for manual module installation by Markus Bauer at 2023-07-28 10:19:24

• use |soc-dir| instead of |soc-family| by Lothar Waßmann at 2023-07-12 10:53:00

• fix substitutions by Lothar Waßmann at 2023-07-12 10:45:01

• consistently use no space between voltage value and unit by Lothar Waßmann at 2023-07-12 10:03:26

• s/do not touch/do not connect/ by Lothar Waßmann at 2023-07-12 10:02:02

• fix hyperlink to original Raspberry Pi Display website by Lothar Waßmann at 2023-07-12 10:01:13

• raspi-display FDT overlay by Lothar Waßmann at 2023-07-12 10:00:23

• describe ‘otg_mode’ by Lothar Waßmann at 2023-07-12 09:58:12

• describe env variables by Lothar Waßmann at 2023-07-12 09:57:28

• change karo-cm33-copro to karo-copro by Lothar Waßmann at 2023-07-12 08:32:09

• fixed the spelling of ‘U-Boot’ by Lothar Waßmann at 2023-07-12 08:30:45

• Replace ‘by hand’ with ‘manually’ by Lothar Waßmann at 2023-07-12 08:17:29

• use include files for differentiating Mainline and NXP BSP by Lothar Waßmann at 2023-07-12 08:17:17

• use list-tables:: instead of table:: where appropriate by Lothar Waßmann at 2023-07-12 08:16:58

• add missing newlines at EOF on some files by Lothar Waßmann at 2023-07-12 08:16:25

• Knowledge Base / Add-On / Panasonic WiFi/Bluetooth added by MV-1 at 2023-07-07 08:08:48

• QS-Guide LCD Update by MV-1 at 2023-06-28 13:07:06

• TX-Guide Update by MV-1 at 2023-06-28 13:06:34

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2023-06-28 10:13:22

• ka-ro theme: update for fix missing favicon by Markus Bauer at 2023-06-21 14:11:43

• QSBASE93 pinout by MV-1 at 2023-06-21 13:02:26

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2023-06-21 13:20:55

• QSBASE93 pinout by MV-1 at 2023-06-21 13:02:26

• finally add substitutions plugin for templating files by Markus Bauer at 2023-06-21 09:51:12

• Update our docs for use with Sphinx v7.0.1 by Markus Bauer at 2023-06-21 09:27:04

• Update github URLs for Kirkstone Update by Lothar Waßmann at 2023-06-19 12:24:40

• fix WARNING: Explicit markup ends without a blank line; unexpected unindent by Lothar Waßmann at 2023-06-16 07:00:24

• add qs8m camera caputre jpg info by Markus Bauer at 2023-06-05 14:31:31

• updated Cortex M33 documentation for Renesas prozessors by Uwe Steinkohl at 2023-05-31 14:24:30

• fit docs for latest KARO-2023-05-25 nxp bsp by Markus Bauer at 2023-05-25 08:12:22

• Refactor indents and newlines from engineering bootmode and move it to howto. by Markus Bauer at 2023-05-25 08:11:48

• QSBASE3 Pinout boot mode description corrected by MV-1 at 2023-04-19 11:36:53

• added engineering boot modd to STM32MP documentation by Uwe Steinkohl at 2023-04-19 09:55:28

• Merge branch ‘NXPcopro’ by Uwe Steinkohl at 2023-04-14 11:46:22

• updated NXP coprocessor doku for use with overlay device trees by Uwe Steinkohl at 2023-04-14 10:59:57

• unify yocto guides and add hint for broken codeaurora stuff by Markus Bauer at 2023-04-04 09:19:19

• TX-Guide clean up by MV-1 at 2023-04-03 11:03:15

• update qt-guide to latest qt6 version steps by Markus Bauer at 2023-03-24 14:39:27

• document qsrz-* and qsbase4 bootmode by Markus Bauer at 2023-03-24 08:12:17

• document fdt overlays for rzg2l modules by Markus Bauer at 2023-02-09 08:46:09

• document new kirkstone mainline release; documentation for rzg2 overlays not completed yet by Markus Bauer at 2023-02-03 15:33:31

• update copyright by Markus Bauer at 2023-01-06 13:31:12

• QSBASE4 CSI pinout, added to Add-On Devices by MV-1 at 2023-01-03 16:28:59

• yocto-guide: remove devshell from docs by Lothar Waßmann at 2023-01-02 08:23:21

• yocto-guide: convert to kirkstone syntax by Lothar Waßmann at 2023-01-02 08:22:38

• corrected indentions in code blocks by Uwe Steinkohl at 2022-12-21 13:12:42

• added Distro Feature copro and karo-copro dt overlay to documentation by Uwe Steinkohl at 2022-12-19 12:48:59

• Terminal Settings: Improve description text by Lothar Waßmann at 2022-12-02 13:44:59

• Knowledgebase: How-To: add link to terminal settings to the UART description by Lothar Waßmann at 2022-12-02 13:22:11

• fix table widths by Markus Bauer at 2022-12-01 10:36:28

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2022-12-01 08:37:02

• downgrade sphinx version to get desired docs by Markus Bauer at 2022-12-01 08:36:55

• Update gh-pages-creation.yml by Markus Bauer at 2022-12-01 08:33:31

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2022-11-30 14:57:53

• mainline bsp kirkstone release; dt-overlays for stm32; uuu for stm32 by Markus Bauer at 2022-11-30 14:57:25

• Renesas-BSP: added support for CM33 coprozessor by Uwe Steinkohl at 2022-11-29 14:18:21

• Various fixes in tables, labels, and more. Removes all (except 4) warnings from build. by Markus Bauer at 2022-11-29 13:56:23

  We now use: autosectionlabel_prefix_document = True
  
  This means, you have to refer to labels/sections likes this:
  
  :ref:`label` -> .. _label (anywhere)
  `section`_ -> section heading on same page
  :ref:`some/other/page:section name` -> section on other page
  

• make u-boot docs look clean and structured by Markus Bauer at 2022-11-25 15:39:42

• Präzisierung des Overlay-Filenamen-Aufbaus by Lothar Waßmann at 2022-11-24 11:05:09

• broken links to U-Boot doc fixed; fdt-overlay docs enhanced by Lothar Waßmann at 2022-11-21 12:56:10

• remove space from ‘Baud rate’ numbers by Lothar Waßmann at 2022-11-18 13:26:07

• Update and more cleanups by Lothar Waßmann at 2022-11-18 12:48:34

• FDT overlays by Lothar Waßmann at 2022-11-17 13:23:40

• nxp-bsp: add new release and tx8p-ml82 support by Markus Bauer at 2022-08-25 10:59:48

• different changes regarding new kirkstone yocto by Markus Bauer at 2022-08-15 10:43:16

• NXP BSP: add kirkstone support docs by Markus Bauer at 2022-08-12 14:44:20

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2022-07-26 06:41:41

• Renesas 5.10.104 kernel version by Markus Bauer at 2022-07-26 06:31:54

• Laird USB adapter added by MV-1 at 2022-07-25 09:52:59

• document qsrz support and KARO_BASEBOARD variable in mainline bsp by Markus Bauer at 2022-07-15 14:05:32

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2022-05-20 09:22:31

• debian guide and software docs for txrz by Markus Bauer at 2022-05-20 09:22:23

• Update table Getting Started Flashtools by MV-1 at 2022-05-12 11:15:24

• new mainline Yocto release and some updates for flashing rzg2l modules by Markus Bauer at 2022-05-10 10:10:51

• add missing rzg2 flashtools files to index by Markus Bauer at 2022-04-29 12:48:39

• QSBASE4 quickstart merge by Markus Bauer at 2022-04-29 12:39:54

• TXRZ-G2L0 support with flash-guide and in mainline Yocto documented by Markus Bauer at 2022-04-29 12:39:41

• QSBASE4 nonfunctional note and corrected X7 pinout by MV-1 at 2022-04-29 11:40:55

• QSBASE4 and TXRZ quickstart added by MV-1 at 2022-04-28 12:57:29

• QSBASE4 pinouts added by MV-1 at 2022-04-07 11:09:32

• mainline yocto: remove karo-image-base from image list by Markus Bauer at 2022-03-14 07:42:57

• Yocto mainline BSP hardknott release. by Markus Bauer at 2022-03-11 11:29:44

  Rework Yocto guides, add MACHINE and DISTRO Features support tables.
  Unify stuff.
  

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2022-03-08 15:31:37

• New yocto bsp releases fixing dirty-pipe vulnerability by Markus Bauer at 2022-03-08 15:31:27

• added some clarifications to the NXP coprocessor doku by Uwe Steinkohl at 2022-02-11 17:43:56

• No need to exclude patches with gitignore, they’re part of the docs! by Markus Bauer at 2022-02-03 15:10:43

• No need to exclude patches with gitignore, they’re part of the docs! by Markus Bauer at 2022-02-03 15:05:21

• Add vscode cross-compile guide by Markus Bauer at 2022-02-03 12:01:49

• basler layer documentation update by Markus Bauer at 2022-01-26 09:32:11

• 5.10.72_2.2.0 KARO-2022-01-17 nxp bsp release. Document new uuu script location by Markus Bauer at 2022-01-17 14:25:35

• update copyright for 2022 by Markus Bauer at 2022-01-17 14:24:47

• guide for updating single files in boot partition written by Markus Bauer at 2021-11-09 09:00:09

• 11/08/2021-US: corrected wrong device tree for m4, added support for m7 by Uwe Steinkohl at 2021-11-08 10:51:01

• Add Yocto customizing u-boot default environment guide. by Markus Bauer at 2021-11-04 13:21:53

  Fix broken search.
  

• NXP Yocto BSP 5.10.52_2.1.0 Release by Markus Bauer at 2021-10-05 12:59:15

• Make all code-block directives with commands a prompt directive. by Markus Bauer at 2021-10-05 11:49:14

  - Add sphinx-prompt plugin
  - refactor code-block directives
  - add documentation help page for prompt
  

• New debian 11 (bullseye) release by Markus Bauer at 2021-09-27 14:24:31

• Add explicit warning for correct Laird wifi part number. Also add nxp camera guide to nxp docs by Markus Bauer at 2021-09-21 09:53:32

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2021-09-09 06:49:56

• Release notes for NXP Yocto KARO-2021-09-08 by Markus Bauer at 2021-09-08 14:17:36

• 2021/08/27-US: added mulicore example to TX8M software documentation by Uwe Steinkohl at 2021-08-27 09:35:31

• New machine learning demo - live object detection for QSXP-ML81 by Markus Bauer at 2021-08-19 11:51:22

• Document KARO-2021-08-17 nxp bsp release and according changes to software by Markus Bauer at 2021-08-17 14:48:45

• update some URLs by Markus Bauer at 2021-08-09 08:52:11

• Update NXP BSP Yocto guide for KARO-2021-08-06 Hardknott Release by Markus Bauer at 2021-08-06 14:12:18

• 2021/07/29-US: added documentation for Cortex-M4 development on NXP processors by Uwe Steinkohl at 2021-07-29 11:36:37

• TX Pinout Overview added by MV-1 at 2021-07-23 07:46:15

• KARO-2021-07-19 NXP Gatesgarth Yocto BSP Release by Markus Bauer at 2021-07-19 14:30:31

• 2021/07/09-US: added gatesgarth for Cortex-M4 development by Uwe Steinkohl at 2021-07-09 14:21:08

• Document STM32 sleep/LP mode. by Markus Bauer at 2021-07-02 08:18:42

  Mainline Yocto KARO-2021-07-02 Release.
  

• New Yocto gatesgarth mainline release by Markus Bauer at 2021-06-18 13:56:24

• Add tx8m-1610 electron Demo file by Markus Bauer at 2021-06-16 06:40:19

• Update gh-pages-creation.yml by Markus Bauer at 2021-05-26 12:29:57

• Merge branch ‘master’ of github.com:karo-electronics/docs by Uwe Steinkohl at 2021-05-26 11:58:26

• 26.05.2021-US: added OpenSTLinux Dunfell documentation by Uwe Steinkohl at 2021-05-26 11:54:59

• Some cleanup and rework in display guide by Markus Bauer at 2021-05-20 14:17:20

• Added: Display Guide main document by Oliver Wendt at 2021-05-20 13:23:50

• Changed: Software-Documentation Index added Display Guide reference by Oliver Wendt at 2021-05-20 12:55:02

• Added: Display Guide (Device Tree) secondary documents for RGB and MIPI-2-(LVDS|RGB) solutions by Oliver Wendt at 2021-05-20 12:50:37

  These documents are secondary documents referenced by the actual Display Guide.
  

• Added: General information files for TX8, referenced by subsequent documentation by Oliver Wendt at 2021-05-20 12:48:46

• Removed: Unfinished documents by Oliver Wendt at 2021-05-19 11:46:53

• Changed: gitignore generalized build directory rule, and added rule to include patch files and directories by Oliver Wendt at 2021-04-27 10:34:26

• Cleanup and unify getting-started guides. Move Flashtools documentation into Software docs by Markus Bauer at 2021-05-19 14:35:34

• update electron guide - add new neccessary packages by Markus Bauer at 2021-05-19 12:25:17

• Add mainline zeus yocto patch release notes by Markus Bauer at 2021-05-18 13:42:08

• Move references directly before headings by Markus Bauer at 2021-05-18 13:40:37

• Update README.md by Markus Bauer at 2021-05-18 06:37:27

• TX8 Software: Add Coral ML accelerator guide. Add images to wifi guide by Markus Bauer at 2021-05-07 14:19:15

• Nxp and mainline BSP new releases. by Markus Bauer at 2021-05-06 14:10:37

  - Different changes in software documentation
  - Fix some references
  

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2021-04-23 14:01:07

• Fix rename Label: ttl-terminal-connection -> ttl-converter-connection by Markus Bauer at 2021-04-23 14:00:48

• QSMP added to MIPI compatibility lists by MV-1 at 2021-04-23 10:02:04

• Add-On Devices - Toshiba Bridge Added by MV-1 at 2021-04-23 09:54:32

• Changed: Typo and ambiguous reference by Oliver Wendt at 2021-04-22 13:18:04

• Integrate u-boot documentation into main docs. by Markus Bauer at 2021-04-21 06:52:05

• Added Document references for U-Boot by Oliver Wendt at 2021-04-20 15:21:00

• Initial U-Boot Guide and Documentation by Oliver Wendt at 2021-04-20 15:17:57

• Update uuu guide: no more libusb needed. add udev-rules by Markus Bauer at 2021-04-16 06:29:33

• List of package thermal properties added to QS-Guide / Thermal Considerations by MV-1 at 2021-04-13 10:11:48

• Simplify Yocto Guides and new Mainline Release by Markus Bauer at 2021-04-12 13:49:30

  - Add Yocto release version as badge
  - Mainline Gatesgarth Release
  - Add one sstate-cache guide for all yocto
  

• U-Boot guide added to up level index by Oliver Wendt at 2021-04-12 13:52:51

• U-Boot Guide initial documents and topics as (mostly) singular files by Oliver Wendt at 2021-04-12 13:52:20

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2021-04-12 12:54:43

• QS-Guide Thermal - pictures added by MV-1 at 2021-04-12 12:54:34

• Update requirements to fix old styled footnotes. by Markus Bauer at 2021-04-09 14:15:10

• More add-on devices by MV-1 at 2021-04-09 08:05:17

  Added to the list: DSI to LVDS bridges, Coral Accelerator
  

• Enable gh-pages auto deploy. Update requirements.txt by Markus Bauer at 2021-03-29 13:08:04

• Update wifi information for Laird module on qsbase3 by Markus Bauer at 2021-03-24 09:56:29

• Update NXP zeus Yocto to 5.4.70_2.3.1 by Markus Bauer at 2021-03-10 13:21:01

  - Add Youtube Videos
  - Add basic machine learning guide
  

• Update linux-imx version typo by Markus Bauer at 2021-03-04 14:05:16

• Add TX8P Debian. Add new Zeus Yocto Mainline Release by Markus Bauer at 2021-03-03 14:33:34

• Fix wrong compatibility in camera addon guide by Markus Bauer at 2021-02-25 14:23:00

• Add electron demo image URL by Markus Bauer at 2021-02-22 14:03:50

• Update electron guide for gpu support TX6 by Markus Bauer at 2021-02-18 08:47:38

• Correct Typo by Markus Bauer at 2021-02-08 12:37:46

• Update debian for all i.mx8 by Markus Bauer at 2021-02-08 10:48:29

• [nxp-zeus-yocto] remove known issue from list that i.mx8 cant reboot by Markus Bauer at 2021-02-05 13:35:21

• Update a headline and camera stream instructions by Markus Bauer at 2021-02-04 09:29:43

• Update latest documentation topics by Markus Bauer at 2021-02-03 12:20:38

• TX8P Support, NXP Yocto 5.4.70-2.3.0 Release by Markus Bauer at 2021-02-03 11:42:10

• Some layout change in ubuntu on win10 guide by Markus Bauer at 2021-01-27 12:40:14

• Added Ubuntu on Windows 10 - Image Deployment by MV-1 at 2021-01-26 14:29:24

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2021-01-26 10:37:17

• Update index.rst by MV-1 at 2021-01-26 10:36:18

  Fixed typo
  

• Add Ubuntu on Win10 info to Yocto Guides by Markus Bauer at 2021-01-26 08:58:07

• Revert “Ubuntu on Windows 10” by MV-1 at 2021-01-26 08:30:02

  This reverts commit c8064279acf561d83fcc616c25eda0d9a6296d6f.
  

• Ubuntu on Windows 10 by MV-1 at 2021-01-26 08:28:17

• Ubuntu on Windows 10 by MV-1 at 2021-01-25 16:29:56

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2021-01-21 16:13:58

• Add-On Devices by MV-1 at 2021-01-21 16:08:32

  A list of add-on peripheral devices has been added.
  

• Fix a Typo - Topcis <-> Topics by Markus Bauer at 2021-01-21 08:43:56

• Document nodejs Electron usage. Some other tiny changes. by Markus Bauer at 2021-01-20 15:56:38

• Update Copyright 2021 by Markus Bauer at 2021-01-20 15:36:20

• Update camera and wifi links. by Markus Bauer at 2021-01-15 14:25:03

• New NXP Zeus Yocto Release KARO-2021-01-11 by Markus Bauer at 2021-01-11 14:52:46

• Document QSXM-MM60 Basler camera usage by Markus Bauer at 2021-01-11 13:48:51

• Update TXMP Getting Started. Put TX8 Debian Guide to Stretch Version by Markus Bauer at 2021-01-04 11:49:24

• Add Yocto custom-layer and recipe creation docs. by Markus Bauer at 2020-12-18 10:34:17

• Document QSXM-MM60 and WiFi for it by Markus Bauer at 2020-12-03 11:50:54

• Add QSMP-1510 Getting Started and it’s Yocto Release documentation by Markus Bauer at 2020-12-01 15:27:02

• Update uuu guide and correct Chromium setup in NXP Yocto by Markus Bauer at 2020-11-26 12:58:51

• Getting started - reference to QSMP on QSBASE1 fixed. by MV-1 at 2020-11-19 13:31:45

• Link to TXMP downloads changed by MV-1 at 2020-11-19 13:00:49

• Update QSXM Bootlog by Markus Bauer at 2020-11-19 08:04:27

• Add QSXP on QSBASE3 docs. + Basler camera. + BT and WiFi Guide. by Markus Bauer at 2020-11-17 15:22:29

• QSXM and QSXP Getting started by MV-1 at 2020-11-12 15:00:09

• New: QSXP WiFi + QS8M Camera Howto + Release Notes for new Yocto NXP Zeus Release by Markus Bauer at 2020-11-05 13:57:10

• Add release notes in Yocto Guides for QT5 development by Markus Bauer at 2020-10-21 13:40:23

• Add QT5 Toolchain development documentation. Add :ref: to it in all Yocto guides. by Markus Bauer at 2020-10-20 12:56:47

• Edit srcbranch for kernel recipe and remove a hint by Markus Bauer at 2020-10-09 12:14:45

• Add nxp docdmentation to root yocto nxp guide by Markus Bauer at 2020-10-09 11:37:26

• Put release notes in start page of bsp guide by Markus Bauer at 2020-10-09 09:59:16

• Documentation for new 5.4.47 NXP Zeus BSP Release by Markus Bauer at 2020-10-09 09:33:11

• Add much better bootmode picture for qsbase3 by Markus Bauer at 2020-10-05 14:10:52

• Merge branch ‘master’ of github.com:karo-electronics/docs by Markus Bauer at 2020-10-05 13:59:41

• Multiple changes in Yocto Guides, Debian Guides, also update Bootmode description by Markus Bauer at 2020-10-05 13:59:28

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2020-10-02 14:17:50

• QSBASE3 pinouts added by MV-1 at 2020-10-02 14:17:41

• Add uboot version hint for nxp zeus yocto by Markus Bauer at 2020-07-28 13:56:35

• Second zeus guide for i.MX8 series. Split into mainline and nxp zeus by Markus Bauer at 2020-07-28 13:52:09

• QS Concept Standard Pinout references by MV-1 at 2020-07-27 12:04:54

• QSCOM renamed to QS by MV-1 at 2020-07-27 09:49:10

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2020-07-27 09:22:27

• QSX added to QS Guide by MV-1 at 2020-07-27 09:21:43

• Yocto Zeus updates and more Getting-Started QSMP on QSBASE2 by Markus Bauer at 2020-07-10 09:35:19

• Merged and added new qsmp on qsbase2 quickstart by Markus Bauer at 2020-07-09 14:02:05

• completed documentation for cortex-M4 development by UweSteinkohl at 2020-07-09 08:47:35

• Merge remote-tracking branch ‘origin/cortexM4’ into master. by Markus Bauer at 2020-06-25 13:19:55

• one-line way for graphical usage on txmp/qsmp by Markus Bauer at 2020-06-25 13:14:07

• added documentation for cortex-m4 development by UweSteinkohl at 2020-06-25 12:58:31

• Add favicon.ico by Markus Bauer at 2020-05-29 10:13:34

• Add BSP Guides and BSP customization guide. by Markus Bauer at 2020-05-29 09:27:21

• Add image documentation and remove .tsv flashing warning by Markus Bauer at 2020-05-27 12:44:54

• Add hint for not working .tsv flash in Yocto Zeus by Markus Bauer at 2020-05-19 15:42:31

• Mark Yocto Thud for QSMP/TXMP as deprecated. by Markus Bauer at 2020-05-19 15:24:36

• Yocto Zeus: add TXMP/QSMP. Add knowledgebase. by Markus Bauer at 2020-05-19 15:09:17

• Merge remote-tracking branch ‘origin/ow-devel-2020-04-20’ by Markus Bauer at 2020-05-18 15:11:12

• Little changes. Knowledgebase not finished yet. by Oliver Wendt at 2020-05-14 07:33:53

• QS-Guide Power Supply, Reset and Bootmode enhanced by MV-1 at 2020-04-29 13:56:26

• TX6 on Mainboard 7 added by MV-1 at 2020-04-28 08:49:27

• Rubric and references applies by Oliver Wendt at 2020-04-17 15:09:58

• Begin rework rubrics, more doc update with OW. by Markus Bauer at 2020-04-17 10:15:01

• Some typos & missed references and some minor edits by Oliver Wendt at 2020-04-16 18:16:46

• Further changes for Zeus release by Oliver Wendt at 2020-04-16 18:09:33

• Revise and Review changes for new Yocto Guide by Markus Bauer at 2020-04-16 10:13:27

• Merge branch ‘ow-master’ by Oliver Wendt at 2020-04-16 09:42:01

• Preliminary changes commit by Oliver Wendt at 2020-04-15 15:39:36

• Initial Commit for Zeus Guide by Oliver Wendt at 2020-04-09 15:24:08

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2020-04-07 09:38:07

• Update testpads.png by MV-1 at 2020-04-07 09:38:00

  Corner pads not connected to GND on QSBASE1
  

• Update README.md by Markus Bauer at 2020-04-03 10:43:09

• Update README.md by Markus Bauer at 2020-04-03 10:03:09

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2020-03-23 07:53:12

• Update PCI.rst by MV-1 at 2020-03-23 07:53:05

  Pin table - row for each pin.
  

• Document u-boot environment change after programming module with STM32_CUBE_PROG by mb-karo at 2020-03-20 15:26:54

• Add TXUL EvalKit Bootmode description. by mb-karo at 2020-03-12 09:45:27

• Add Changelog to documentation. by mb-karo at 2020-03-10 09:31:43

• Add QS8M Raspi Display support. by mb-karo at 2020-03-03 15:35:52

• Fit table sizes. by mb-karo at 2020-02-20 09:59:09

• Add build host requirements to start page for yocto guide. by mb-karo at 2020-02-20 09:46:31

• picture added to solder sask guidelines by MV-1 at 2020-02-20 09:34:19

• Correct machine names in Yocto Rocko Guide for TXUL. by mb-karo at 2020-02-20 09:21:01

• Update qs-back.png by MV-1 at 2020-02-20 09:18:16

• Add the QS8M also in overview of Yocto Guide. by mb-karo at 2020-02-20 08:04:26

• fix broken table. by mb-karo at 2020-02-10 15:07:30

• Make PDF link downloadable in TXMP getting started. by mb-karo at 2020-02-10 15:03:47

• Add TXMP quickstart and Yocto guide. by mb-karo at 2020-02-10 14:51:20

• Wiring picture for QS8M. Update some references. by mb-karo at 2020-01-30 11:16:39

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2020-01-29 13:43:48

• UART & USB pin names corrected by MV-1 at 2020-01-29 13:43:39

• Add different quickstart picture. Rewrite UUU guide. Update bootmode jumpers and debug connector wiring. by mb-karo at 2020-01-29 11:00:15

• Add quickstart and Yocto/Chromium Guide for TX8M-1620,QS8M-MQ00. by mb-karo at 2020-01-27 16:38:16

• Added TX8M, TXMP VDDIO by MV-1 at 2020-01-20 09:31:51

• X11 Version B picture by MV-1 at 2019-12-20 14:21:36

• QSBASE2 pinout added by MV-1 at 2019-12-20 13:11:59

• Rework getting-started area. by mb-karo at 2019-12-20 12:58:02

  - Images in table for better orientation.
  - GLYN info link in display section.
  - STM32-Programmer Guide.
  

• Fit Chromium instructions. FlashingImages is now replaced by gettingstarted/uuu. by mb-karo at 2019-12-05 11:22:07

• Generalize and update instructions for QTCreator. by mb-karo at 2019-12-05 11:17:24

• Add new TX6/UL Yocto Sumo Build instructions. Move CAN interface documentation. by mb-karo at 2019-12-05 11:04:12

• Add TX8M-ND00 support in YoctoGuide. Add UUU Guide. by mb-karo at 2019-12-03 12:17:07

• Merge branch ‘master’ of https://github.com/karo-electronics/docs by MV-1 at 2019-11-26 13:30:41

• Initial QS guide by MV-1 at 2019-11-25 16:36:26

• QSBASE1 test pads added by MV-1 at 2019-11-25 16:35:28

• fix little typo in environment setup for yocto guide qsmp. by mb-karo at 2019-11-25 11:11:44

• TTL to USB –> TTL to USB Serial Converter by mb-karo at 2019-11-13 12:38:30

• Modified pictures for qsmp quickstart and add some text as introduction to yocto guide. by mb-karo at 2019-11-13 12:34:37

• Add pictures to quickstart guide. Remove rst2pdf config. by mb-karo at 2019-11-13 09:46:20

• Add quickstart for QSBASE1 and re-structure some things. by mb-karo at 2019-11-12 15:14:03

• Re-organize complete structure of project. Add documentations for QSMP (Quickstart & Yocto). by mb-karo at 2019-11-11 10:51:12

• Add QSBASE1 pinouts by MV-1 at 2019-11-11 09:01:31

• Update tx6ul-pinouts.rst by MV-1 at 2019-11-11 08:59:39

  Fixed 1-2-7 connected
  

• Add toolchain QT5 Yocto docs. Add pictures for Mipi-LVDS pinouts. by mb-karo at 2019-10-22 12:32:50

• Add TX6UL EvalKit documentation. Add missing custom files MFG-Tools documentation. by Markus Bauer at 2019-10-16 11:13:42

  Re-structure whole documentation.
  

• Update pip requirements. by Markus Bauer at 2019-10-11 07:23:21

• Remove hint, that imx-linux-sumo is only branch since its no longer. by Markus Bauer at 2019-10-11 07:08:40

• Update URL’s to our new homepage. by Markus Bauer at 2019-10-08 07:34:28

• Update Sumo documentation version link for yocto setup listing supported machines. by Markus Bauer at 2019-09-27 14:25:44

• Add CAN and Chromium support in Yocto Guide. Remove old version 4.14.78 from docs. by Markus Bauer at 2019-09-06 11:39:06

• Update Sumo Guide - only ignore u-boot when building full images. by Markus Bauer at 2019-08-30 06:35:28

• Update documentation for new TX6/TXUL machines in Yocto Sumo 4.14.98 by Markus Bauer at 2019-07-16 12:52:44

• Update the uuu.auto script after feedbock. some minor changes in uuu calls. by Markus Bauer at 2019-06-05 07:49:55

• Add hint on how to enable graphics acceleration in QT5 image. by Markus Bauer at 2019-06-04 12:50:54

• Add debian-guide for TX6. by Markus Bauer at 2019-05-29 14:06:28

• Replace all “by hand” inserted links with references for future changes of folder structure etc. by Markus Bauer at 2019-05-28 10:47:56

• Add information about display usage. by Markus Bauer at 2019-05-22 06:48:16

• Fix broken image. add vlc instructions. fix typo. by Markus Bauer at 2019-05-14 06:15:19

• Split debian guide for TX6 and TX8, create uuu doc for win7, update several docs. by Markus Bauer at 2019-05-10 09:06:11

• Change pictures to new ones. Move pin headers to hardware documentation. by Markus Bauer at 2019-05-09 11:21:04

• update to redesign of Quickstart. by Markus Bauer at 2019-05-08 14:08:43

• Update building up and unboxing for new development kit. by Markus Bauer at 2019-05-07 15:01:46

• add qt5 toolchain sdk to image list. by Markus Bauer at 2019-05-02 10:04:59

• Add some more documentation in debian guide for TX8. by Markus Bauer at 2019-04-26 10:57:27

• Re-structure complete documentation, update many links, update debian instruction, etc… by Markus Bauer at 2019-04-25 15:19:17

• Add known u-boot issue. by Markus Bauer at 2019-04-23 12:52:26

• TX8M, TX8X added by MV at 2019-04-16 12:41:16

• TX8X USB3 added by MV at 2019-04-16 12:40:22

• TX8X added by MV at 2019-04-16 12:30:25

• TX8M added by MV at 2019-04-16 12:28:32

• TXUL, TX8M, TX8X added by MV at 2019-04-16 12:26:04

• Update uuu.auto script, write fewer examples and details for setting up yocto environment. by Markus Bauer at 2019-04-16 11:33:20

• JP1 changed to upper case by MV at 2019-04-16 09:39:10

• Add uuu fast solution for customers. by Markus Bauer at 2019-04-15 14:09:27

• Add TX8M website url to quickstart guide. Correct line indent on code piece of EnableSstate. by Markus Bauer at 2019-04-15 13:08:36

• Update Yocto guide for using new sstate-cache. by Markus Bauer at 2019-04-12 14:41:06

• Update for new machine config. by Markus Bauer at 2019-04-12 11:27:54

• Add “FlashingImages” to guide user through example usage of UUU when building yocto images. by Markus Bauer at 2019-04-10 13:40:39

• Remove spell-mistake in quickstart. Add u-boot configs in yocto guide and fit it to actual BSP. by Markus Bauer at 2019-04-09 13:25:47

• Merge remote-tracking branch ‘origin/uwe’ by Markus Bauer at 2019-04-09 08:23:46

  # Conflicts (solved):
  #	docs/tx8m/quickstart-devkit.rst
  

• connector descripion added by Uwe Steinkohl at 2019-04-09 08:07:03

• Finish complete TX-Guide in documentation. by Markus Bauer at 2019-04-08 13:32:37

• TX Guide, finish all PinAssignments. by Markus Bauer at 2019-04-08 10:10:13

• More in PinAssignments capitel for TX-Guide. See files for details. by Markus Bauer at 2019-04-05 14:42:19

• Add repository information and some explanation to yocto guide. by Markus Bauer at 2019-04-05 10:48:14

• TX6UL, TX8M, TX8X added by MV at 2019-04-05 10:30:48

• New version of quickstart guide for TX8M devkit. See whole commit message for changelog. by Markus Bauer at 2019-04-04 11:45:56

  - Change .gitattributes to SSH url of theme again for publish script to work
  - disable link of txull quickstart, content is not ready for publishing
  - move FAQ to index page
  - re-structure quickstart of TX8M to guide the user
  

• getting started update from 03042019 by Uwe Steinkohl at 2019-04-03 17:09:51

• 02042019_1 by Uwe Steinkohl at 2019-04-02 09:35:50

• 01042019 by Uwe Steinkohl at 2019-04-01 17:25:17

• rename some stuff. edit quickstart table layout. by Markus Bauer at 2019-04-01 14:23:52

• Test U by Uwe Steinkohl at 2019-04-01 13:32:11

  Test U
  

• update gitmodules. by Markus Bauer at 2019-04-01 13:26:37

• Adding pdf support, make yocto guides have the same textual base. by Markus Bauer at 2019-03-29 14:53:48

• update base structure. by Markus Bauer at 2019-03-29 14:18:40

• Update the setup for the new karo-imx-sumo supported distros and images. by Markus Bauer at 2019-03-28 15:13:26

• Continuing work on TX-Guide documentation. Added Ethernet Signals, USB and I2C. by Markus Bauer at 2019-03-26 15:25:23

• Add Yocto sumo guide (first part). by Markus Bauer at 2019-03-25 14:52:30

• Edit more tables. Add page for RTCPowerButton. by Markus Bauer at 2019-03-25 10:00:04

• update table. by Markus Bauer at 2019-03-22 15:55:52

• add numbered headlines for the docs where it makes sense. improve structure of yocto documentation. by Markus Bauer at 2019-03-22 13:30:15

• add tx-guide, update theme. change some stylings and pages. by Markus Bauer at 2019-03-22 11:22:19

• add yocto sstate, kernel version and customizing guide to documentation. by Markus Bauer at 2019-03-21 11:36:18

• Finish yocto rocko tx6 documentation. by Markus Bauer at 2019-03-21 08:11:09

• custom table layout - add css and js for this. change NOTE’s look. by Markus Bauer at 2019-03-20 15:15:22

• Remove repositories folder. begin adding yocto documentation. by Markus Bauer at 2019-03-20 09:59:25

• Update README.md by Markus Bauer at 2019-03-19 15:30:01

• Basic setup repository, + add first documentation structure. by Markus Bauer at 2019-03-19 15:27:51

• Initial commit by Markus Bauer at 2019-03-19 14:20:36