• Getting Started
    • QS8M
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QS8M-MQ00
        • QS8M-ND00
    • QSXM
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QSXM-MM60
    • QSXP
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QSXP-ML81
    • QS91
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QS91-3110
    • QS93
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QS93-5210
    • QS95
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QS95-9610
    • QSMP
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QSMP-1351
        • QSMP-1530
        • QSMP-1570
        • QSMP-1570W
        • QSMP-2030
        • QSMP-2350
        • QSMP-2550
    • QSRZ
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • QSRZ-G2L0
        • QSRZ-G2L1
    • TX8M
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TX8M-1610
        • TX8M-1620
    • TX8P
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TX8P-ML81
    • TX93
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TX91-3110
    • TX93
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TX93-5210
    • TXMP
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TXMP-1570
        • TXMP-1571
        • TXMP-2570
    • TXRZ
      • First Steps
      • Install Quick Guide
      • Yocto Quick Guide
        • TXRZ-G2L0
        • TXRZ-G2L1
    • Next Steps
      • Software
      • Hardware
  • Hardware Documentation
    • QS-GUIDE
      • Concept
      • Feature Overview
        • EMC Quality by Design
        • Advanced Soldering
        • Standard Pinout
      • Guidelines & Recommendations
        • Layout Guidelines
          • Land pattern
          • Solder Mask
          • GND Vias
          • Future-proof Land Pattern
          • Future-proof Solder Mask
        • Placement Guide
          • Pick and Place
          • Pick offset
          • Thermal Considerations
        • Soldering Recommendations
          • Recommended stencil design
          • Solder Paste
        • Handling and Storage Guidelines
          • Transport and Delivery Condition
          • Processing After Opening
          • Recommended Storage Conditions and Overall Shelf Life
      • Standard Pinout
        • Power Supply, Reset and Boot mode
          • Power Supply
          • QS Operating conditions
          • QSX Operating conditions
          • NRST_PWREN - Reset and Peripheral Power Enable
            • QSMP
            • QS8M
            • QSX
          • BOOTMODE
        • USB
          • VBUS
          • Wiring example
          • USB3 Super Speed
        • SD Interface
          • Signals
          • SD-Card example diagram
        • Ethernet
          • Wiring example
        • CAN
        • I2C
        • SAI
          • Signals
        • SPI
        • UART
        • Display
          • Backlight and Display Control
          • 18-bit RGB Display Interface
          • MIPI DSI Display
          • LVDS Display
        • Camera
        • PCIe
      • Packaging
      • QS Series Pinout Spreadsheet
      • Disclaimer
      • Intended Audience
      • Acronyms and Abbreviations
    • TX-GUIDE
      • Concept
      • Feature Overview
      • Standard Pinout
        • Power Supply
        • Reset & Bootmode
        • RTC & Power-Button
        • Ethernet Signals
          • Ethernet Physical Layer Layout Guidelines
          • Power and Ground Planes
          • 4 Layer Stackup
          • 2 Layer Stackup
          • Component Placement
          • Design Techniques for EMI Suppression
          • Controlled Impedance for Differential Signals
          • Magnetics Module
        • USB
          • USB Physical Layer Layout Guidelines
          • Controlled Impedance for USB Traces
          • Isolation of DP/DM Traces
          • Isolated shielding on the USB connector
          • USB recommendations
        • I2C
          • Example I2C Voltage Level Translator (TX27 and TX51 only)
          • I2C recommendations
        • PWM / 1-WIRE
        • CSPI - Configurable Serial Peripheral Interface
        • SDIO Interfaces
          • SD-Card example diagram using level shifters
          • SD-Card example diagram only for 3.3V modules
        • UARTs
          • UART Example diagram
        • Keypad Interface
        • Digital Audio Ports
        • CMOS Sensor Interface
        • Extended and 2nd CMOS Sensor Interface (TX51, TX53 and TX6 only)
        • LCD Interface
        • LVDS option
          • LVDS pin mapping
          • LVDS recommendations
          • USB3 pin mapping (TX8P only)
          • SATA pin mapping (TX53, TX6Q, TX6QP only)
          • SATA recommendations
        • CAN Interface
        • PCI express
          • PCI Express interface recommendations
            • PCI Express general routing guidelines
            • PCI Express coupling lane
          • PCIe recommendations
        • GPIO and module specific signals
        • TV out (TX51, TX53 only)
          • TV Encoder Recommendations
      • Optional Debugging Connector
        • Debug Connector Signal Assignment
        • Debug connector location
      • Mechanical
        • TX module outline
        • SO-DIMM connector
        • DIMM Connector PCB Layout example
        • TX Fastener Kit
        • TX Heatsink Kit (7 K/W)
          • Standard extruded heatsink – SK 560 – length 68mm
          • Heat conductive gel foil – GEL 28 S 25
        • TX Heatsink Kit (17 K/W)
          • Standard extruded heatsink – SK 473 – length 68mm
          • Heat conductive gel foil – GEL 10
        • TX Heat Spreader
      • TX Series Pinout Overview
      • Disclaimer
      • Intended Audience
      • Acronyms and Abbreviations
    • Baseboards
      • QS-Baseboards
        • QSBase1
          • Quickstart Guide
            • Unboxing
            • Wiring
            • Booting
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
            • X1 LCD
            • X10 DEBUG UART
            • JTAG Header
            • Test Pad Numbering
        • QSBase2
          • Quickstart Guide
            • Unboxing
            • Wiring
            • Booting
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
            • Test Pad Numbering
            • X7 DEBUG UART
            • X8 EXPANSION CONNECTOR
        • QSBase3
          • Quickstart Guide
            • Unboxing
            • Wiring
            • Terminal Connection
            • Booting
            • Next Step Usage
            • Next Step Software
            • Next Step Hardware
          • Pinout
            • X2 BOOTMODE
            • X3 DEBUG UART
            • X9 EXPANSION CONNECTOR
            • X6 MIPI DSI
            • X102 1st MIPI CSI
            • X103 2nd MIPI CSI
            • X101 M.2
        • QSBase4
          • Quickstart Guide
            • Unboxing
            • Wiring
            • USB-UART driver
            • Booting
            • Nonfunctional
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
            • X13 BOOTMODE
            • X14 DEBUG UART
            • X7 EXPANSION CONNECTOR
            • X2 MIPI DSI
            • X8 MIPI CSI
            • X1 JTAG Header
        • QSBase5
          • Quickstart Guide
            • Unboxing
            • Wiring
            • USB-UART driver
            • Booting
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
            • X12 BOOTMODE
            • X5 DEBUG UART
            • X6 EXPANSION CONNECTOR
            • X2 LVDS display connector
            • X9 MIPI CSI
            • X18 PCIe connector
            • X10 JTAG
        • QSBase93
          • Quickstart Guide
            • Unboxing
            • Wiring
            • USB-UART driver
            • Booting
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
            • X3 USB-C
            • X15 USB-A
            • X12 BOOTMODE
            • X5 DEBUG UART
            • X6 EXPANSION CONNECTOR
              • X2 LVDS display connector
            • X9 MIPI CSI
            • X10 JTAG
        • QSBase95
          • Pinout
            • X5 USB-C
            • X15 USB-A
            • X12 BOOTMODE
            • X10 DEBUG UART
            • X6 EXPANSION CONNECTOR
            • X1 MIPI CSI
            • X2 MIPI DSI
            • X3 PCIe connector
            • X14 JTAG
          • Power measurement
            • QS95 Current Measurement
      • TX-Baseboards
        • TX Mainboard 7
          • Quickstart Guide
            • Unboxing
            • Wiring
            • Booting, First steps
            • Next Steps Usage
            • Next Steps Software
            • Next Steps Hardware
          • Pinout
        • TX MIPI-LVDS Mainboard
          • Quickstart Guide
            • Unboxing
            • Assembling and Connecting
            • Terminal Connection
            • Booting
            • Next Step Usage
            • Next Step Software
            • Next Step Hardware
          • Pinout
            • X3 Header (Debug connector)
            • X4 Header
            • X9 Header
            • X10 Header
            • X11 Header
            • X14 Header (MIPI-CSI connector)
        • TX6UL Evaluation Kit
          • Pinout
            • ST103 UART5 / CAN0
            • ST102 UART6 / CAN1
            • ST101 UART2 / UART3
            • ST100 UART1
            • ST104 MISC
            • ST105 LCD
  • Software Documentation
    • U-Boot
      • Introduction
      • Terminal Connection
        • Requirements
        • Terminal Program
        • Terminal Settings
        • Power-On and Reset Output
      • Environment
        • Reset of Variables
        • Automatically assigned variables
      • Configuring the network
        • General
        • DHCP
        • Manual IP
      • U-Boot Commands
      • Devicetree Overlays
        • Overview
          • List of Supported Baseboards
          • Overlay Filenames
          • Predefined Overlays
          • Automatic FDT overlay loading
          • FDT overlays debugging
          • Manually applying FDT overlays
        • HW Features
          • FDT overlays for various peripherals
          • Selected FDT overlays per module/baseboard combination
          • FDT overlays for various LCD/LVDS Displays
        • Building FDT Overlays with Yocto
        • Writing Custom Overlays
          • General syntax of an FDT overlay file
          • FDT Overlay Example
          • Adding overlays for a custom baseboard
    • Linux
      • General
        • CPU Temperature
      • Sleep Mode / Low Power
      • Graphics
        • Test the GPU
        • Play a Video
    • Debian Guide
      • Debian 12
        • Using Flashimage
        • Manual installation
          • Build the Netinstaller Flashimage
            • References
            • BSP Setup
            • Setup Build Directory
            • Build
            • Find the results
          • Boot the Netinstaller
          • Debian 12 Netinstaller Walkthrough
      • Debian 9
        • MFGTool DEBIAN-STRETCH
          • Environment
          • DTB
          • Kernel and kernel modules
          • Rootfs
        • MfgTool DEBIAN-NETINSTALLER
          • Environment
          • DTB
          • Kernel and kernel modules
          • Initrd RAM disk
        • Debian Netinstaller on TX6
          • 1. Select language and location
          • 2. Configure the network
          • 3. Choose a mirror and download installer components
          • 4. Set up users and passwords
          • 5. Ignore partitioning warnings
          • 6. Partitioning
          • 7. Popularity-contest
          • 8. Software selection
          • 9. Ignore Grub warning
          • 10. Continue without bootloader
        • Install Desktop Environment
    • Yocto Guide
      • Host Setup
        • Linux Virtual Machine
          • Enable Hyper-V
          • Create Virtual Machine
          • Change partition size
          • Shared folder
        • Windows Subsystem for Linux (WSL)
          • Prerequisites
          • Install WSL
          • Connect USB devices
            • Install the USBIPD-WIN project
            • Attach a USB device
          • WSL NFS Server
      • Board Support Packages
        • Yocto Wrynose Guide
        • Yocto Scarthgap Guide
          • Build Environment Setup
            • Native Linux
              • Requirements
              • Setup
            • VS Code + DevContainer
              • Requirements
              • Setup
              • Yocto Project BitBake Extension
          • BSP Setup
            • Setting up Git
            • Setting up the Repo Utility
            • BSP Checkout
          • Building Images
            • Setup Build Directory
            • Configuration
              • Baseboard (optional)
              • Machine Features
              • Distro Features
            • Build the Image
            • Image Deployment
              • i.MX
              • STM32MP
              • RZ/G2L
          • Customization Guide
            • Getting Started: Creating Your Custom Layer
            • Customizing a Recipe
            • Creating your own baseboard settings
            • Customizing U-Boot (u-boot-karo)
              • Customizing U-Boot Configuration
              • Adding a Custom Device Tree Blob (DTB)
              • Customizing the U-Boot Default Environment
            • Customizing the Linux Kernel (linux-karo)
              • Customizing Linux Kernel Configuration
              • Adding a Custom Device Tree Blobs (DTB)
            • Creating Custom Images
              • Basic Custom Image
              • Custom Partition Layout
              • Partition Export
      • If you’re new to Yocto
    • Flashtools
      • UUU - Universal Update Utility
        • Getting uuu
        • udev Rules
          • STM32 based Modules
        • Usage
        • Running uuu
        • UUU with Custom Files
          • Creating Filesystems
          • Script Examples
      • Flashing STM32MP modules
        • Prerequisites
        • Start Fastboot
        • Execute UUU
      • Flashing RZ/G2L modules
        • Initial Bootloader Flashing
        • Flashing via Fastboot
      • Mfgtool
        • MFGTool Setup
          • Overview
          • Unpack MfgTool.zip
          • 1. Execute MfgToolSetup.bat
          • 2. Enter p/n
          • 2.1. Installation type
          • 3. Choosing Cutsom Files
          • 4. MfgTool2 is Started
        • Adding Custom Files
          • Environment settings
          • Change mtdparts - NAND partition layout
      • STM32CubeProgrammer
        • Installing STM32CubeProgrammer
        • USB serial link
        • Flash the eMMC
        • U-Boot Environment
      • Manual Installation
        • Files
        • Partitioning
        • USB Mass Storage
        • Host Computer
          • Copying a Filesystem
          • Copying single Files
        • Target Configuration
    • Peripherals
      • Display Guide
        • Supported Displays
        • Enable Display
          • STM display setting
          • Raspberry Pi Touch Display
          • RGB Displays
        • MIPI Bridges
          • Texas Instruments SN65DSI83
          • Toshiba TC358867
        • Setting Display Resolution
          • MIPI to LVDS Bridge
          • MIPI to RGB Bridge
        • Custom Panel
      • Camera Guide
        • Supported cameras
        • Enabling camera support in Yocto images
        • Streaming / capturing video
          • Streaming on NXP i.MX modules
            • Raspberry Pi Camera (IMX219) on i.MX8M Mini/Nano (qs8m, qsxm)
            • Raspberry Pi Camera (IMX219) on i.MX8M Plus (qsxp-ml81)
            • Basler cameras (qsxm-mm60, qsxp-ml81 on QSBASE3)
          • Streaming on STM32MP2 modules
      • WiFi/BT Guide
        • Overview
        • Laird Sterling LWB5+ (USB)
          • Build
          • Usage
        • Laird ST60-2230C-P (PCIe)
          • Setup
          • Devicetree overlay
        • Ath9k PCIe WiFi module
        • Panasonic PAN9028 (on-board SDIO, NXP 88W8987)
          • Get drivers
          • Use module
        • On-board WiFi/BT on STM32MP “w” modules
        • User-space Guide
          • Connecting WiFi
          • Set Up Bluetooth
          • Connect Bluetooth
    • Secure Boot Guide
      • Secure Boot on QSMP-15* modules
        • Create signature key
        • Copy the keys into the BSP directory
        • Putting signature key on the module
        • Set variables and build the image
    • Update Frameworks
      • RAUC
        • Introduction
        • Yocto Setup
        • Host Setup
          • Prerequisites for host PC
          • Building rauc for host PC from sources
          • Install rauc on host PC
        • Using rauc
          • Start the rauc service on the module
          • Create a bundle on host PC
          • Install the bundle on the module
          • HTTPS streaming of the bundle
        • Eclipse hawkBit™
          • Using Eclipse hawkBit™ as backend solution
          • hawkBit™ base server setup
          • Access hawkBit™ Management API via Swagger-UI
          • Control Management API via hawkBit™-UI
        • Custom partitioning and system.conf
      • SWUpdate Framework
    • Applications
      • VS Code Cross-Compilation
        • Introduction
        • Prerequisites
          • Get VS Code
          • Host Packages
          • Toolchain Setup
        • VS Code Project Setup
          • Project Folder
          • Install Extension
          • Sources
          • Settings
        • Cross-Compilation
        • Deploy to Target
        • Remote Debugging
        • Breakpoints
      • Electron Guide
        • Introduction
        • Demo Video
        • Setup
          • Precompiled Images
          • Debian Setup
          • Yocto Setup
        • Start Demo Application
        • Remote Debugging
      • Chromium Browser
        • Build
        • Running Chromium
      • LVGL Guide
        • Building an LVGL application
          • Introduction
          • Precautions
            • Building the OS image
            • Building the SDK
            • Downloading and Cross-compiling the LVGL library and sample apps
          • Mount an NFS Share
          • NFS-Mount your host’s project folder on your target device
          • Starting the cross-compiled LVGL application on your target device
        • Using NXP GUI-Guider to build applications
          • Introduction
      • QT Guide
        • Requirements
        • Build
        • Installing SDK
        • Installing QT Creator
        • Setup QT Creator
          • SDK
          • Device
        • Hello World
      • Machine Learning Guide
        • Introduction
        • Demo Video
        • Precompiled Images
        • Yocto Setup
        • Demos
          • Live Object Detection
      • Coral Edge TPU Guide
        • Introduction
        • Setup
        • Getting Started
          • karo-image-ml
          • PyCoral Library
          • Run a Model on TPU
        • Next Steps
      • Coprocessor Guide
        • NXP Coprocessor Development
          • Development environment setup
            • MCUXpresso SDK
            • GNU toolchain
            • CMake
            • Customizing the BSP for coprocessor support
          • Hello-world on the Cortex-M coprocessor
            • Building the firmware
            • Deploying the firmware to the target
            • Starting the firmware
          • Multicore RPMsg-Lite demo
            • Precautions
            • Starting the coprocessor firmware from U-Boot
            • Linux side
            • Starting the firmware via remoteproc (sysfs)
        • STM32MP Coprocessor Development
          • Cortex®-M4 development
            • Coprocessor Firmware Development
            • Coprocessor Management Overview
            • How to boot the Cortex® Coprocessor
            • How to configure system resources
            • Resource manager for coprocessing
            • Kernel Configurations needed
            • Device Tree Modifications needed
            • How to install the FDT overlay for copro support
            • How to use firmware sample projects of the STM32CubeMP1 package from ST
            • How to Control the Coprocessor from Linux
            • How to start the Coprocessor from the bootloader
          • Cortex®-M33 Coprocessor Development
            • STM32MP2 boot flavor
            • Differences Between A35-TD Flavor and M33-TD Flavor Boot Chains
              • A35-TD Flavor Boot Chain
              • M33-TD Flavor Boot Chain
            • How to prepare your Linux image for Cortex®-M33 Coprocessor support
            • How to install the FDT overlay for Coprocessor support
            • Deploying the firmware to the target
            • How to Control the Coprocessor from Linux
            • dynamic debugging
        • Renesas Coprocessor Development
          • Installation of the Renesas Software packages
          • Setup of eval kit for CM33 debugging
          • Customizing the BSP for coprocessor support
          • Running the rpmsg demo sample from Renesas
            • SRAM (internal RAM)
            • DRAM (external RAM)
            • Default RZ/G2L Memory Map in the BSP
            • Deploying the firmware to the target
            • Starting the firmware from U-Boot
            • Starting the rpmsg_sample from Linux
  • Regulatories
    • Cyber Resilience Act (CRA) Guide
      • Secure Update
      • Software Bill of Materials (SBOM)
        • SBOM generation in the Ka-Ro BSPs
        • Output locations
        • SBOM detail level
      • CVE Management
        • Vulnerability checking with Yocto
        • Scanning with VulnScout (open source)
      • Secure Boot
  • Knowledge Base
    • How-To’s
      • Enabling USB-Bootmode
        • QS(X) Modules
        • TX Modules
        • Physical Pins
          • QSBASE1
          • QSBASE2
          • QSBASE3
          • QSBASE4
          • QSBASE5
          • QSBASE93
          • TX-(MIPI)-LVDS Mainboard
          • TX Mainboard 7
          • TXUL EvalKit
      • Engineering Boot Mode Details
        • Boot modes
        • Situation on the QSMP module
        • Situation on the TXMP module
      • TTL Converter Terminal Connection
        • Wiring
        • Accessing
          • Linux
          • Windows
      • Updating Files
        • USB Mass Storage
        • Serial Port
        • UUU way
      • Running UUU on Windows 7
        • Installing winusb file
        • Using Zadig to make UTP work
      • Linux WiFi Setup
        • 1. Find the WiFi device
        • 2. Bring up the device
        • 3. Scan for networks
        • 4. Connect
        • 5. Obtain an IP address
        • 6. Test the connection
      • Converting ramdisk .img file for U-Boot
    • Troubleshooting
      • UUU USB Failures
        • UUU exits without displaying anything
        • Wait for Known USB Device Appear
        • TX8M-ND00 LIBUSB-HID-ERROR
    • Known Issues
      • Linux Issues
        • Compile errors with modern Kernel on Host
          • Problem:
          • Cause:
          • Workaround:
          • Procedure:
      • U-Boot Issues
        • Loading kernel is very slow
          • Problem:
          • Cause:
          • Workaround:
          • Procedure:
    • General Information
      • Documentation Help
        • Hints, Tips & Co.
        • Prompts
      • Yocto Sources Handling
        • Preamble
        • Sources in Yocto
    • Add-On Devices
      • WiFi/ Bluetooth
      • CAN
      • Camera
      • Display
      • Neural Network Processing
  • FAQ
    • Getting started
    • Building and flashing
    • System and U-Boot
    • Compliance
    • Documentation Help
  • News
  • Changelog
 
Ka-Ro electronics GmbH
  • Docs »
  • Hardware Documentation »
  • Baseboards »
  • TX Mainboard 7 »
  • Pinout
  • View page source

Next Previous

Pinout¶

See the Mainboard 7 PDF Documentation.

Next Previous

View page source

© Copyright 2019 - 2026, Ka-Ro electronics GmbH

Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

Support requests to support@karo-electronics.com

Homepage
https://karo-electronics.com
GitHub
https://github.com/karo-electronics
Related Links