Secure Boot

Secure Boot is a fundamental cybersecurity mechanism that ensures an embedded device only executes authorized, manufacturer-verified firmware and software upon startup. It protects against tampering, malware, and unauthorized firmware updates by establishing an unbroken chain of trust from the hardware up to the operating system.

The CRA requires that only verified software can run on a product — Secure Boot is the standard way to enforce this on embedded devices.

Ka-Ro support

Currently only STM32MP1 modules have Secure Boot tooling in our BSPs. For all other processor variants, support in our BSPs is not yet available — refer to the vendor documentation. The same per-family overview is in the Secure Boot Guide:

SoC family

Module series

Mechanism

Status

Documentation

STM32MP1

QSMP-1xxx, TXMP-1xxx

TF-A trusted boot

supported

step-by-step with our BSP + ST Wiki - Secure Boot

STM32MP2

QSMP-2xxx, TXMP-2xxx

TF-A trusted boot

not yet supported

ST Wiki - Secure Boot

i.MX9

TX91, QS91, TX93, QS93

AHAB

not yet supported

i.MX Security User’s Guide

NXP i.MX8

TX8M, TX8P, QS8M, QSXM, QSXP

HAB

not yet supported

i.MX Security User’s Guide

NXP i.MX6

TX6, TXUL

HAB

not planned

i.MX Security User’s Guide

Renesas RZ/G2L

QSRZ-G2Lx, TXRZ-G2Lx

—

not planned

—

Note

Enabling Secure Boot on a module is irreversible in practice — once closed, only signed images boot. Test thoroughly on development units before rolling it out.